Mirroring a HPUX System

Developed on HP-UX 11.11
pvcreate -B /dev/rdsk/c1t0d0 #use real disk

mkboot -l /dev/rdsk/c1t0d0
mkboot -a “hpux -lq (;0)/stand/vmunix” /dev/rdsk/c1t0d0 # use real disk

# mkboot -b /usr/sbin/diag/lif/updatediaglif -p ISL -p AUTO -p HPUX -p PAD -p LABEL /dev/rdsk/c?t?d?

If you are running 64-bit OS:

# mkboot -b /usr/sbin/diag/lif/updatediaglif2 -p ISL -p AUTO -p HPUX -p PAD -p LABEL /dev/rdsk/c?t?d?

vgextend /dev/vg00 /dev/dsk/c1t0d0 # same thing
lvextend -m 1 /dev/vg00/lvol1 /dev/dsk/c1t0d0

# real disk. repeat for other lvols

lvlnboot -r /dev/vg00/lvol3 # root fs /
lvlnboot -s /dev/vg00/lvol2 #swap
lvlnboot -d /dev/vg00/lvol2 #swap/dump
lvlnboot -b /dev/vg00/lvol1
lvlnboot -R
lvlnboot -v
setboot

setboot -a 52.1.0 # second disk

Setboot hardware path to legacy hardware path

HP-UX 11.23

setboot provides output only including the hardware path (ioscan -H).

When calculating DRD clone targets and such you need the regular legacy device path.

Here is a converter, built with a little help from JRF on the ITRC forums.

First get the setboot path. Might want to use the full path of the setboot command in practice.

pboot=$(setboot | grep ^Primary | awk ‘{ print $NF }’);
aboot=$(setboot | grep ^Alternate |awk ‘{ print $NF}’);

abootdisk=$(ioscan -kfnCdisk | awk -v aboot=${aboot} ‘/aboot/ $0~aboot {getline;print aboot,$2}’ | awk ‘{ print $2 }’);

pbootdisk=$(ioscan -kfnCdisk | awk -v aboot=${pboot} ‘/pboot/ $0~pboot {getline;print pboot,$2}’ | awk ‘{ print $2 }’);

The slick part is getting the variable in and out of awk.

Uses ioscan.